Technical Sheet
A U S I N Y L M / D N
- Additive for Polyamides -
Chemical-Physical Characteristics
Classification : Chemicals on Polyamide
Melting Point : 220 °C
Form / Colour : White Granules
Status : Approved
Application Characteristics
AUSINYL M/DN is an Additive Wich When compounded into Polyamides Dramatically Affects the Cristallization Rate.
AUSINYL M/DN is a complete Sytem (nucleating and Mold Release Agent).
No others Additives are needed For Having :
- a short cycle Times
- a good mold Filling
- a strong Mold-Release
- a good Flow of the melted PA
- an important dimensional Stability of injected Articles.
Thanks to the physical Form, AUSINYL M/DN Permits :
- a very easy Addittivation
- the Dosage of a sole Product
- a lower Possibility of Mistakes
- to Obtain Granules not greasy,, not dusty, free flowing, transportable by pneumatic Systems, Without Obstruction of Filters, Wind-Cones, etc.
Addition Levels
The recommended Addition Levels Are As Follows :
- 0,5 %~0.6% in the PA-6.6
- 0.6 %~0.8% in the PA-6
Higher Dosages (till 3 %) could be employed Without Contra-Indications.
